imes-icore Burs
For Cobalt-chromium & Titan
Compatible with imes-icore®
Material: Chromium cobalt, Titanium
T81 - 1.5 | 6.0 mm DRILLING TOOL (L=18 mm)
×
- Diameter : 1.5 mm
- Shaft : 6.0 mm
T80 - 2.5 | 6.0 mm DRILLING TOOL (L=22 mm)
×
- Diameter : 2.5 mm
- Shaft : 6.0 mm
T1/T6 - 3.0 | 3.0 mm RADIUS MILLING TOOL (L=15 mm)
×
- Design : Radius end mill
- Diameter : 3.0 mm
- Shaft : 3.0 mm
T2/T7 - 2.0 | 3.0 mm RADIUS MILLING TOOL (L=12 mm)
×
- Design : Radius end mill
- Diameter : 2 mm
- Shaft : 3mm
T4/T9 - 1.0 | 3.0 mm RADIUS MILLING TOOL (L=9 mm)
×
- Design : Radius end mill
- Diameter : 1.0 mm
- Shaft : 3.0 mm
T1/T6 - 3.0 | 6.0 mm RADIUSFRÄSER KURZ (L=15 mm)
×
- Design : Radius end mill
- Diameter : 3.0 mm
- Shaft : 6.0 mm
T26 - 3.0 | 6.0 mm RADIUS MILLING TOOL (L=20 mm)
×
- Design : Radius end mill (long)
- Diameter : 3.0 mm
- Shaft : 6.0 mm
T2/T7 - 2.0 | 6.0 mm RADIUS MILLING TOOL (Up to 15mm)
×
- Design : Radius end mill (short)
- Diameter : 2.0 mm
- Shaft : 6.0 mm
T27 - 2.0 | 6.0 mm RADIUS MILLING TOOL (L=16 mm)
×
- Design : Radius end mill (long)
- Diameter : 2.0 mm
- Shaft : 6.0 mm
T4/T9 - 1.0 | 6.0 mm RADIUS MILLING TOOL (L=9 mm)
×
- Design : Radius end mill (short)
- Diameter : 1.0 mm
- Shaft : 6.0 mm
T29 - 1.0 | 6.0 mm RADIUS MILLING TOOL (L=11 mm)
×
- Design : Radius end mill (long)
- Diameter : 1.0 mm
- Shaft : 6.0 mm
T20 - 0.6 | 6.0 mm RADIUS MILLING TOOL (Up to 15 mm)
×
- Design : Radius end mill (Conical)
- Diameter : 0.6 mm
- Shaft : 6.0 mm
T20 - 0.6 | 3.0 mm RADIUS MILLING TOOL (Up to 15 mm)
×
- Design : Radius end mill, tapered (Conical)
- Diameter : 0.6 mm
- Shaft : 3.0 mm